It's controlled by four angles, thus the pressure is more precise to control and the final products have higher precision; For PC terminations above 95% could pass 3D interferometer test, while for APC terminations this rate keep 90%;
Each polishing jig for this machine is available as LC, SC, ST, FC, MTRJ, E2000 PC connector as well as angle polishing; May process each kind of standard fiber optic connectors, such as FC/UPC/APC,SC/UPC/APC, ST/UPC/APC, LC/UPC/APC, ,MU/UPC/APC, MTRJ,E2000/UPC/APC etc.
The Tool is designed to work on jacketed or jacketed and armored multi-fiber cable.Their main purpose is to gain midspan access to fiber optic conductors by slitting the outer jacket or jacketed and armored on the above cables.The tool is designed with a precision adjustable blade to avoid damage to the fibers.The cable outer diameter range is noted below.The blade can be set up to .215″(5.5mm) deep for each model.
The Tool is designed to work on jacketed or jacketed and armored multi-fiber cable.Their main purpose is to gain midspan access to fiber optic conductors by slitting the outer jacket or jacketed and armored on the above cables.The tool is designed with a precision adjustable blade to avoid damage to the fibers.The cable outer diameter range is noted below.The blade can be set up to .215″(5.5mm) deep for each model.
